Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Dryer Vent Cleaning in Johns Creek: What to Know First
CleanRun Air Duct Cleaning Johns Creek provides independent Rotobrush service for dryer vent cleaning throughout Johns Creek, from the Medlock Bridge corridor to the neighborhoods off State Bridge Road. Most Rotobrush dryer vent jobs we handle are completed in a single visit, with a written price delivered before any work begins and a documented photo record of every duct run included as standard. We are not affiliated with or authorized by Rotobrush; we are an independent service provider that knows these systems from hands-on work across thousands of homes.
This page is for homeowners in Johns Creek who own Rotobrush equipment and need dryer vent cleaning, vent rerouting, or bird guard installation done by technicians who can name the part before they open the truck. Call (470) 326-1926 for a free estimate with a written price.
How Rotobrush Products Fail - and How We Fix Them
- Beast Series brush motor burnout from lint back-feed. The Beast line’s high-torque motor pulls aggressively, which works well until lint packing in a long vertical vent creates enough resistance to overheat the windings. In Johns Creek’s two-story builds with roof-terminated vents, we see this most often in homes off McGinnis Ferry Road where the vent run exceeds 25 feet. We test amp draw before and after cleaning, and if the motor shows thermal damage, we document it with photos before quoting replacement.
- Brush cable fatigue in the Roto-Vision 4500 inspection system. The 4500’s push cable develops kinking at the 15-foot mark when homeowners force it past a 90-degree elbow without proper lubrication. We replace the cable assembly with quality aftermarket line from our Nikro inventory when OEM lead times stretch past two weeks, and we note the substitution in writing on the job record per Haven Standard Clause 1.
- Air Duct Cleaning Machine vacuum seal degradation on the DMII. The DMII’s HEPA canister seal hardens faster in Georgia’s humidity than in drier climates, and Johns Creek’s tree canopy keeps ambient moisture high through October. We check seal pliability with every service, replace with Guardsman-compatible gaskets when needed, and photograph the seal condition for the customer record.
- Beast Mini clutch slippage under lint load. The Mini’s compact clutch assembly was not designed for the packed lint we find in dryer vents that haven’t been cleaned in three-plus years. We see this in rental properties near Johns Creek High School where turnover hides maintenance history. We disassemble, clean the clutch faces with solvent, and re-gap to factory spec; replacement is only quoted when friction surface scoring is visible under magnification.
- Roto-Vision camera head fogging from temperature differential. The camera head fogs when moved from a hot attic into a cool duct run, which in Johns Creek happens routinely from April through October. We pre-warm the head in the supply plenum before insertion and carry desiccant packs in the kit. The photo goes first. The price comes after.
Our Rotobrush Dryer Vent Cleaning Process

- 1
Call and scheduling. A live person answers, confirms the Rotobrush model if known, and notes any symptoms. We schedule a window; no “call for a quote” - Haven Standard Clause 1 requires a written price on site before work starts.
- 2
Arrival and verification. The technician, background-checked and uniformed under Haven Standard Clause 3: Verified Crews, identifies by name before entry. Tomas Reyes or a senior tech inspects the Rotobrush unit for model, serial, and visible damage.
- 3
Diagnostic with documentation. We run the Rotobrush camera through the full vent run, photographing lint accumulation, elbow condition, and termination point. The customer sees these images on a tablet before any price is discussed.
- 4
Written price and scope. We deliver one flat price per system, itemized for cleaning, parts if needed, and any rerouting. The customer signs or declines; no work proceeds without written agreement.
- 5
Service and re-test. We clean with Rotobrush-compatible brushes and negative-pressure extraction, replace parts with OEM or documented aftermarket per customer approval, and test airflow and temperature at the termination. Before-and-after photos of every duct run are saved to the job record.
- 6
Deliverables and guarantee. The customer receives the documented photo record, the signed scope, and the 365-Day Done Right Promise in writing. Payment is collected; the truck does not leave until all three documents are in the customer’s hand.
Before
AfterWhat Rotobrush Dryer Vent Cleaning Costs in Johns Creek
These are the ranges we have written on actual Rotobrush jobs in Johns Creek homes since 2023. Every price is flat per system, agreed before work starts.
| Service | Typical Range |
|---|---|
| Standard Rotobrush dryer vent cleaning (single-family, vent run under 20 feet) | $189 - $269 |
| Extended vent run cleaning (20-35 feet, common in two-story Johns Creek builds) | $279 - $349 |
| Vent rerouting with new termination cap | $389 - $549 |
| Bird guard installation (stainless, code-compliant for Johns Creek) | $149 - $219 |
| Rotobrush brush motor or clutch replacement (parts + labor) | $329 - $479 |
What moves the price: vent length and elbow count, accessibility (crawl space vs. second-floor laundry), and whether the Rotobrush unit itself needs repair versus cleaning-only. We also service Lennox, Trane, and Carrier systems with the same flat-price structure. Call (470) 326-1926 for a free estimate - we’ll put our written number next to any competitor’s quote under our Free Second Opinion policy.
Why Johns Creek Homeowners Call CleanRun Air Duct Cleaning Johns Creek for Rotobrush Work

We have serviced homes throughout Johns Creek since 2013, including the neighborhoods around the Medlock Bridge corridor where the two-story builds with zoned systems tend to hide the worst accumulation behind secondary return boxes. Tomas Reyes and our crew know Rotobrush equipment from hands-on repair, not from a dealer manual. Every job carries the 365-Day Done Right Promise in writing, the documented photo record is delivered as standard, and our equipment roster - Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - is published so customers can verify what touches their system.
We are independently owned and operated under the Haven Standard. No franchise. No urgency theatre. Just a written price, a documented result, and a crew that answers the phone live.
FAQs
No. As an independent Rotobrush service provider, we use warranty-safe practices: OEM parts when available, documented quality aftermarket when lead times require it, and no modifications to factory electrical or safety systems. We note all parts provenance on the job record so warranty claims remain straightforward if you ever need them.
Run the unit without the vent connected. If airflow is strong and the unit does not overheat, the restriction is in the vent run, not the Rotobrush. We test this on every diagnostic call and show you the amp draw and airflow numbers before quoting. Call (470) 326-1926 and we’ll walk through it on the phone, or schedule a free estimate.
We stock OEM brushes, cables, and seals for the Beast, Beast Mini, DMII, and Roto-Vision lines. When Rotobrush factory lead times exceed two weeks - which happens seasonally - we substitute quality aftermarket from our Nikro and Guardsman inventory, note the substitution in writing, and price accordingly. You approve before installation.
If the motor, clutch, and vacuum seal are all showing wear, replacement often costs less than sequential repairs over 18 months. We assess this honestly: if two or more major components need work, we will tell you so and let the photo record support the recommendation. No repair is quoted if replacement is the better value.
We schedule within a few business days for non-emergency Rotobrush service. Dryer vent cleaning is a scheduled maintenance job, not an emergency dispatch, and we do not promise same-day arrival we cannot reliably deliver. What we do promise: a live person answers your call, a written price before work starts, and a documented photo record when we leave. Call (470) 326-1926 to book.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Johns Creek at CleanRun Air Duct Cleaning Johns Creek, serving Johns Creek and nearby areas.




Before
After
Before
After