Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Duct Cleaning in Johns Creek: What to Know First
CleanRun provides independent Abatement Technologies air duct cleaning in Johns Creek, with most residential systems completed in a single scheduled visit and whole-home pricing typically running $380-$620 before any work begins. We are not affiliated with or authorized by Abatement Technologies. Every job starts with a written price under Haven Standard Clause 1, and every duct run is photographed before and after so you can see what was actually removed.
This page is for Johns Creek homeowners with Abatement Technologies HEPA filtration systems, negative air machines, or portable scrubbers installed in their homes, particularly the PREDATOR and HEPA-AIRE series common in newer construction around the Medlock Bridge corridor and Abbotts Bridge area. If your Abatement Technologies equipment is connected to your home’s ductwork or you need the ducts cleaned before reinstalling portable units, call (470) 326-1926 for a free written estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 750 series blower motors seize from fine drywall dust accumulation in Johns Creek’s active construction zones. The high-RPM motor draws unfiltered return air during finish work, and the bearing housing packs with gypsum particulate. We disassemble the blower housing, photograph the buildup, and clean with negative-pressure extraction (a contained vacuum system that prevents recontamination) rather than compressed air, which voids the motor warranty.
- HEPA-AIRE PAS2400 filters collapse at the pleat base when subjected to Atlanta’s extended pollen seasons. The 24x24x12 OEM filter is rated for 2,400 CFM, but Johns Creek’s March-May oak and pine pollen loads exceed design capacity in homes without pre-filtration. We document the pressure drop across the filter bank, clean the upstream ductwork to reduce loading, and source the heavier-duty PAS2400-HD pleat frame when the application demands it.
- Abatement Technologies portable scrubber duct adapters leak at the flex-collar connection after repeated repositioning. The OEM vinyl flex hardens in Georgia’s attic heat and loses seal memory. We replace with silicone-impregnated polyester flex rated for 180°F continuous service, not the generic hardware-store equivalent that cracks in two seasons.
- LA2000 series negative air machines develop condensate in the blower scroll when ducted through unconditioned crawl spaces common in Johns Creek’s 1990s-era ranch builds. The cast-aluminum scroll corrodes at the drain port threads. We clean the scroll interior, chase the threads with a tap set, and install a brass drain fitting that outlasts the OEM zinc-plated steel.
- Abatement Technologies HEPA filtration retrofits on Carrier or Trane systems create static pressure imbalances that mask as dirty ducts. The high-efficiency final filter adds 0.35 inches WC (water column, a measure of air resistance) that the original blower was not selected for. We measure total external static pressure before quoting any cleaning, because scrubbing ducts that are already undersized for the new filter load wastes your money and strains the motor.
Our Abatement Technologies Air Duct Cleaning Process
- 1
System identification and static pressure baseline. We record the Abatement Technologies model, serial, and installation date, then measure pressure across the filter bank and at the air handler with a digital manometer.
- 2
Video inspection of every duct run. A self-leveling camera enters each supply and return line. The footage is time-stamped and stored to your job record.
- 3
Written scope and price delivered before disassembly. Haven Standard Clause 1: no work begins until you have a signed, itemized scope with one flat price per system. No per-vent add-ons.
- 4
Negative-pressure extraction with Abatement Technologies-compatible tooling. We select brush diameter and RPM based on your duct gauge (typically 26-gauge galvanized in Johns Creek residential), using Rotobrush or Nikro equipment sized to the Abatement Technologies CFM rating.
- 5
Component-level cleaning of Abatement Technologies equipment. Blower wheels, filter tracks, and plenum boxes are cleaned in place or removed for service, depending on contamination level.
- 6
Post-clean verification and photo record delivery. We re-measure static pressure, run the system through a full cycle, and deliver before-and-after photographs of every duct run as a standard deliverable. The 365-Day Done Right Promise is activated in writing.
BeforeAfterWhat Abatement Technologies Air Duct Cleaning Costs in Johns Creek
Whole-home Abatement Technologies air duct cleaning in Johns Creek ranges from $380-$620 for systems up to 4 tons, depending on duct configuration and contamination level. Two-story homes with zoned systems and secondary return boxes, common in Country Club of the South and St. Ives, typically run $520-$780 due to additional duct runs and access complexity.
What moves the price: number of supply and return registers (we count them, not estimate), presence of Abatement Technologies HEPA filtration requiring component removal, and whether the system has been cleaned in the past five years. Heavy construction debris or rodent remediation requires additional containment and is priced separately after inspection.
We also service Lennox, Trane, and Carrier systems with integrated Abatement Technologies accessories. Every estimate is free, written, and delivered before any work starts. Call (470) 326-1926 to schedule.
Why Johns Creek Homeowners Call CleanRun Air Duct Cleaning Johns Creek for Abatement Technologies Work
Tomas Reyes and our crew have cleaned Abatement Technologies systems in Johns Creek since 2013, including the first generation of PREDATOR units installed during the 2015-2018 building surge around McGinnis Ferry Road. We know the difference between a PAS2400 and a PAS1200 filter frame, and we stock the common wear parts so your job isn’t delayed waiting for Atlanta distribution.
Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. You receive a documented photo record of every duct run, the written 365-Day Done Right Promise, and a free second opinion on any competitor’s written estimate. The photo goes first. The price comes after.
We are independently owned and operated, not a franchise, and we answer calls with a live person 24/7.
FAQs
No, professional air duct cleaning performed by a qualified technician does not void your Abatement Technologies equipment warranty. The warranty covers defects in materials and workmanship, not maintenance. We document our methods and use manufacturer-compatible procedures so there’s no dispute if a future claim arises. For questions about your specific warranty status, call (470) 326-1926 and we’ll review it with you.
OEM Abatement Technologies filters guarantee the rated MERV and pressure-drop specifications, but quality aftermarket filters from Honeywell and Aprilaire meet the same standards at lower cost. We source based on your system’s measured static pressure, not brand loyalty. If your Abatement Technologies unit is still under factory warranty, we note the filter choice on your invoice for documentation. Call (470) 326-1926 for a filter compatibility check.
You receive a time-stamped photo record of the interior of every duct run, before and after, as a standard deliverable on every CleanRun job. The images are geo-tagged to your Johns Creek address and stored to your job file. If a company cannot show you what came out of your ducts, you are paying for a procedure, not a result. For a documented cleaning, call (470) 326-1926.
Age of the equipment and age of the ductwork are separate questions. In Johns Creek, we regularly find heavy accumulation in supply ducts of homes built during the 2020-2022 construction rush, where finish contractors ran HVAC systems during drywall sanding without filtration. The Abatement Technologies unit itself may be clean while the connected ductwork is loaded. Our camera inspection shows you the actual condition before you decide. Schedule a free look at (470) 326-1926.
We clean both. Commercial Abatement Technologies installations in Johns Creek, such as the HEPA-AIRE units common in medical and dental suites along State Bridge Road, require containment protocols and after-hours scheduling to maintain occupancy requirements. Pricing is scoped per system after a walk-through. For commercial or residential Abatement Technologies cleaning, call (470) 326-1926 for a written estimate.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Johns Creek at CleanRun Air Duct Cleaning Johns Creek, serving Johns Creek and nearby areas.