Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Alpharetta, GA | CleanRun Air Duct Cleaning Johns Creek
Air Duct Cleaning - Alpharetta for Trane systems typically runs $380-$620 for a complete multi-zone residential system, with most jobs scheduled within a week. We’re an independent crew, not a Trane-authorized dealer, and we’ve worked on Trane residential equipment in Alpharetta since the brand’s XR and XB lines dominated the 1990s build-out here. The thing that makes our Trane work different in this city is the sheer concentration of original flex-duct systems in communities like Windward, where three-zone Trane air handlers push high static through 25-year-old duct runs that are now separating at the collars. Call (470) 326-1926 for a written estimate before any work starts.
Why Alpharetta Residents Choose Us for Trane Service
We know the Trane cabinet geometry cold. The XR14 and XR16 air handlers, the XV18 and XV20i variable-speed units, the old XB13 workhorses still running in basements off Rucker Road, we’ve opened all of them in Alpharetta attics. Tomas Reyes, our owner, trained in HVAC fundamentals at CUNY Kingsborough Community College in Brooklyn before spending two decades doing hands-on duct work across the Southeast. For the past several years, he and our crew have serviced homes throughout the Johns Creek and Alpharetta corridor, including neighborhoods around the Medlock Bridge corridor, where two-story builds with zoned systems hide the worst accumulation behind secondary return boxes.
We use Trane OEM gaskets, filter racks, and coil-pan parts when they’re still available. When they’re not, we source quality aftermarket flex, mastic, and boot collars that match Trane dimensions exactly, never a generic substitute that won’t seal on the cabinet lip. Every job starts with a written price under Haven Standard Clause 1. Every job ends with a Documented Photo Record of every duct run, before and after, delivered as part of the standard job record. The photo goes first. The price comes after.
Our equipment roster includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman, names you can look up independently before you agree to anything. We’re licensed, insured, and our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews.
Common Trane Air Duct Cleaning Problems We Solve in Alpharetta
- All-aluminum cased coils wicking condensate into plenum insulation. Trane’s XR and XV air handlers use this coil design, and in Alpharetta’s humid cooling season, May through September, that moisture loads the supply duct with mold fibers that stick to flex-duct walls. We clean the coil pan, replace saturated insulation, and photograph the interior before sealing.
- Variable-speed air handlers blowing apart original 1990s flex at boot collars. The XV18 and XV20i push high static pressure through long attic runs in Windward and comparable communities. The inner liner separates from the outer jacket at the collar, sending insulation fibers into the airstream. We find this with video inspection, replace the damaged flex section, and reseal with mastic.
- Outdoor condenser coils trapping yellow pine pollen and cottonwood seed. Alpharetta’s retained tree canopy produces some of the metro’s highest spring pollen counts. A dirty Trane XB or XR condenser coil runs inefficient and pulls unfiltered air through the return, accelerating debris accumulation in horizontal attic duct runs. We clean the coil and the return system together.
- Zoning panels and bypass dampers failing partially open. Original Trane zoning hardware from the 1990s tract build can stick or fail, so one zone gets cleaned repeatedly while another zone’s return flex duct collects years of settled pollen and blown-in insulation. We test every damper position and clean what the airflow has been missing.
- Low-point pockets in sagging flex duct hiding mold and pollen accumulation. In Alpharetta’s master-planned communities, original flex duct sags at boot collars in hot attics. Those low points fill with pine pollen and insulation fibers, often with mold colonization from condensation cycles. Homeowners don’t notice until allergy symptoms spike or filters load every two weeks.
BeforeAfterTrane Service in Alpharetta: What Local Conditions Mean for Your Equipment
Alpharetta’s explosive growth from roughly 1988 to 2005 produced something no neighboring city replicates: block after block of 3,000-5,000+ square foot homes, now 20-35 years old, with complex multi-zone flex duct systems installed fast during tract construction. In Windward and comparable communities, the original Trane air handlers went into the attic with three zoning dampers and long flex runs that sag at the boot collar. The duct problem is almost always at the collar and the low pockets, never at the register where a homeowner might think to look.
Because Alpharetta sits in the Piedmont with retained tree canopy, the spring yellow pine surge loads into return-air systems at levels technicians in denser, less wooded Atlanta neighborhoods simply don’t see. That pollen settles in those horizontal flex duct low points, combines with blown-in insulation fibers from decades of attic disturbance, and creates exactly the accumulation that Trane’s high-static variable-speed handlers then blow into living spaces when a collar finally separates. We’ve cleaned systems where the homeowner described airflow as “fine” and the camera showed three inches of packed debris at the first elbow above the bonus room.
Trane Models & Products We Service in Alpharetta
We regularly service Trane XR Series units (XR13, XR14, XR16), the XR17, Trane XB Series (XB13, XB14), and Trane XV Series variable-speed systems (XV18, XV20i). For Trane sales & service context, we’re an independent provider, not manufacturer-affiliated.
Our Alpharetta crew stocks Trane-compatible coil-pan gaskets, filter racks, and OEM hardware for common models. For older XB13 and early XR units where OEM parts are discontinued, we carry dimension-matched aftermarket flex, mastic, and boot collars verified to seal on Trane cabinet geometry. We don’t substitute generic parts that won’t seat correctly. If your Trane air handler is over 15-18 years old with a rusted coil pan or failed variable-speed module, we’ll tell you directly: duct sealing and cleaning will improve airflow, but it won’t extend an end-of-life unit.
Our core sub-services on Trane systems include Flex Duct Repair, Evaporator Coil Cleaning, and Video Inspection, the last being how we show you what we’re quoting before you commit to any work.
Trane Service Pricing in Alpharetta
Whole-system Trane air duct cleaning in Alpharetta ranges from $380 for a single-zone XB or XR system with straightforward access, to $620 for a multi-zone XV variable-speed installation with extensive flex repair, coil cleaning, and video documentation. Factors that move the price: number of zones, linear feet of flex duct, condition of boot collars, whether the evaporator coil pan needs cleaning, and how many returns require negative-pressure extraction.
Every estimate is free. We deliver a written price before any panel comes off, per Haven Standard Clause 1. No per-vent pricing. No coupon that triples once the truck arrives. We also offer a Free Second Opinion on any competitor’s written estimate, our number next to theirs, both in writing.
Call (470) 326-1926 for an exact quote on your Trane system. Estimates are free, and you’ll get the written price before we start.
Serving Alpharetta, GA - Our Local Coverage Area
We’re based in the Alpharetta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Alpharetta
Yes. The XV20i’s variable-speed motor pushes higher static pressure than single-stage units, which accelerates separation at original boot collars in Alpharetta’s 1990s flex-duct homes. We’ve found significant debris in 10-year-old systems because the ductwork is original to the house, not the air handler, which is why Alpharetta Dryer Vent Cleaning is often needed alongside duct service. Call (470) 326-1926 for a video inspection and written estimate.
The all-aluminum cased coil in your XR14 is likely wicking condensate into the plenum insulation, which then breeds mold in Alpharetta’s 70%+ humidity from May through September. That mold loads the supply duct and distributes through the registers. We clean the coil pan, replace saturated insulation, and photograph the interior before sealing. Call (470) 326-1926 to schedule.
Yes. Windward’s homes are larger, with more zones and longer flex runs through hot attics, and the original Trane installations used boot collars that sag over time. Combined with Alpharetta’s high pine-pollen load, the debris accumulation is measurably heavier than in older, smaller homes with shorter duct runs. The photo record on every job shows the difference.
We can, with modified negative-pressure extraction that won’t damage fiberglass duct board. We inspect first with video to assess board integrity; if it’s degraded, we recommend replacement rather than cleaning. The written estimate includes both options before any work starts.
No. We are an independent service provider, not Trane-authorized or manufacturer-affiliated. We’ve worked on Trane residential equipment in this market since the 1990s, and we use OEM-compatible parts that seal correctly on Trane cabinets. Our 365-Day Done Right Promise and Documented Photo Record apply to every job regardless of brand authorization.
Service Areas Near Alpharetta
We run Alpharetta service area calls from our Johns Creek base, covering the full corridor including neighborhoods off Medlock Bridge Road, Windward Parkway, and Rucker Road. Nearby, we also handle Trane service in Johns Creek and Trane service in Duluth, plus Norcross, Suwanee, and Roswell. The same crew, same equipment roster, same written-price-first standard applies across all locations.
Book Your Trane Service in Alpharetta Today
Call (470) 326-1926 to schedule your Trane system evaluation. You’ll speak to a live person, not a queue. We’ll send a background-checked, uniformed technician who’ll show you the video inspection, deliver a written price before any work starts, and leave you with a Documented Photo Record of every duct run. Every job is backed by our 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Johns Creek, serving Alpharetta and the greater Johns Creek area since 2013.