Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterWhy Johns Creek Homeowners Choose Carrier Air Duct Cleaning
CleanRun Air Duct Cleaning Johns Creek provides independent Carrier Air Duct Cleaning in Johns Creek, GA, coil cleaning, and flex duct repair for Carrier Infinity, Performance, and Comfort systems throughout the area. We are not authorized or endorsed by Carrier; we are a local crew that has worked on Carrier equipment since the old square air handler days and keeps current by servicing hundreds of Carrier systems across North Fulton each year. Our jobs start with a written price before any panel comes off, and every duct run is photographed before and after. Call (470) 326-1926.
Why Trust CleanRun Air Duct Cleaning Johns Creek for Your Carrier Air Duct Cleaning?
Tomas Reyes, who leads our crew, grew up in Queens, New York, helping his uncle patch window units in apartment buildings. He trained in HVAC fundamentals at CUNY Kingsborough Community College in Brooklyn, then spent the better part of two decades doing hands-on duct work across the Southeast. For the past several years, Tomas and our technicians have serviced homes throughout Johns Creek, including neighborhoods around the Medlock Bridge corridor, where two-story builds with zoned Carrier systems tend to hide the worst accumulation behind secondary return boxes. We also offer Carrier repair in Alpharetta for homes with similar zoned system configurations.
We know Carrier equipment from the inside out. We have cleaned the FE4 and FE5 air handlers that sit in sweltering Johns Creek attics, pulled blower wheels from 58-series furnaces in finished basements, and traced collapsed flex duct through the chase systems of 1990s subdivisions. The photo goes first. The price comes after. Every job is backed by our 365-Day Done Right Promise, and every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Our license number is published on this page, not buried in a footer.
Common Carrier Air Duct Cleaning Problems We Fix in Johns Creek
- Carrier Infinity FE4/FE5 air handlers with coil matting. These variable-speed air handlers are excellent units, but their cabinet doors seal poorly after years of heat cycling in Johns Creek attics. The negative pressure draws attic dust directly into the return, where it packs onto the evaporator coil face as a sticky mat. In humid Georgia summers, that mat restricts airflow enough to freeze the coil. We see this on Infinity 24ANB and 24VNA systems regularly. Our fix: video inspection of the coil face, chemical cleaning with Carrier-approved foaming cleaner, and resealing the cabinet with OEM gaskets.
- Carrier 58-series and 59MN7 furnaces with dirty blower wheels. The 58STA, 58STX, 58MCA, 58MVP, and the modulating 59MN7 are common in Johns Creek basements and mechanical closets. When the return plenum is undersized or unsealed, negative pressure pulls insulation fibers and construction debris into the blower housing. The wheel goes out of balance, bearings wear unevenly, and static pressure climbs. We remove the blower assembly, photograph the wheel condition, and clean or recommend replacement based on what we find.
- Carrier N-coil evaporators with hidden lint buildup. The N-coil design in many Performance and Comfort cased coils has a tight fin pattern that traps lint on the entering face. Homeowners call us complaining that their 24ACC or 24ACB condenser “isn’t cooling right,” but the real problem is a 5-10°F temperature split loss at the coil. This lint is not visible from the outside. We use a borescope to document it, then clean in place or pull the coil if the buildup has bonded to the fins.
- Carrier flex duct runs collapsed or torn at collars. The R-4.2 and R-6 flex duct installed in Johns Creek homes built between 1988 and 2006 has now spent 20-40 years in attic chases where summer temperatures exceed 140°F. The inner liner degrades, the collar separates from the boot, and conditioned air dumps into the attic while dirty attic air gets pulled into the return. We find this in Medlock Bridge and St. Ives homes constantly. Our repair uses mastic-sealed connections and replacement flex that meets or exceeds Carrier’s original R-value and fire rating specs.
- Carrier heat pump 25HPA systems with winter ice-up. When return ducts leak or the blower wheel is dirty, airflow across the indoor coil drops. In heat pump mode, that reduced airflow lowers the coil temperature and extends defrost cycles. In Johns Creek’s occasional hard freezes, the 25HPA can ice up completely. We check static pressure, clean the blower and coil, and seal return leaks to restore proper airflow before the homeowner spends money on a refrigerant charge they don’t need.
BeforeAfterCarrier Parts & Our Repair-vs-Replace Approach
We use OEM Carrier-approved seals, gaskets, and cabinet hardware when they are still available from distribution. For flex duct, mastic, and insulation, we specify aftermarket products that meet or exceed Carrier’s original R-value and fire rating requirements. Our equipment roster includes Rotobrush, Nikro, and Abatement Technologies for negative-pressure extraction, plus Honeywell, Aprilaire, and Guardsman air quality components.
If your Carrier air handler or coil is more than 15 years old and has a breached cabinet or failed coil, we will show you the video and give you an honest repair-vs-replace recommendation. Haven Standard Clause 1 requires a written price before any work starts, so you will have that number in hand before deciding. No cleaning solves a cracked drain pan or corroded heat exchanger. We do not sell procedures that do not address the actual problem. Call (470) 326-1926 for a free second opinion on any written estimate.
Our Carrier Service Process - Step by Step
- 1
Diagnosis with documentation. We start with static pressure testing at the supply and return plenums, then video-inspect the coil face, blower wheel, and accessible duct runs. For Carrier Infinity systems, we also check the FE4/FE5 control board for fault codes. You receive the photos before we discuss scope.
- 2
Written scope and price. Haven Standard Clause 1: we deliver a written price for the full system cleaning, coil cleaning, or flex duct repair before any work begins. No exceptions. The price covers the complete system, not per-vent add-ons.
- 3
Cleaning and repair with Carrier-compatible methods. We use foaming cleaner approved for Carrier aluminum fins, negative-pressure extraction with HEPA containment, and OEM or spec-matching seals. Flex duct repairs are mastic-sealed and photographed.
- 4
Post-service testing. We re-check static pressure, temperature split, and airflow at the registers. For variable-speed Carrier systems, we verify the FE4/FE5 blower is operating within its designed CFM range.
- 5
Deliverables and warranty. You receive the complete Documented Photo Record of every duct run, coil, and blower wheel, plus the written 365-Day Done Right Promise. If the work is not right, we make it right.
Carrier Products We Service & Install in Johns Creek
We service and clean Carrier Infinity series (24ANB, 24VNA condensers with FE4 and FE5 air handlers), Performance series (24ACC, 24ACB, 25HPA heat pumps), and Comfort series (24ABB, 24ABC) systems. We also work on Carrier 58-series furnaces (58STA, 58STX, 58MCA, 58MVP) and 59MN7 modulating furnaces. For flex duct repair and plenum sealing, we stock R-6 and R-8 replacement duct, mastic, and OEM-compatible gaskets for the cabinet seal kits Carrier used on FE-series air handlers.
We Also Service These Brands
CleanRun Air Duct Cleaning services in Johns Creek are not limited to Carrier. We clean and repair Lennox and Trane systems with equal familiarity, and our technicians carry the tooling and sealants for all major residential HVAC brands. Our documented photo record and written pricing apply regardless of manufacturer.
FAQs - Carrier Air Duct Cleaning Service in Johns Creek
No. We are an independent Carrier service provider, not authorized or endorsed by Carrier. We have no affiliation with Carrier Corporation. We service Carrier equipment based on hands-on experience with hundreds of units across North Fulton, not on manufacturer certification. Our 365-Day Done Right Promise is backed by CleanRun, not Carrier.
Yes, but the cause is usually more specific. On FE4 and FE5 air handlers, a blower motor fault often traces to excessive static pressure from a dirty coil or blocked return, which forces the variable-speed motor to overamp. We check static pressure first, then video-inspect the coil face and blower wheel. A clogged coil or torn flex duct in the return path is common in Johns Creek’s attic-duct systems. Call (470) 326-1926 and we will diagnose it with photos.
No, provided the cleaning is done correctly. Carrier’s warranty covers defects in materials and workmanship; it does not prohibit duct cleaning. We use methods and chemicals compatible with Carrier’s aluminum fin specifications, and we do not modify factory wiring or refrigerant circuits. We document our process so you have a record if any warranty question arises.
Signs include longer heating cycles, a rumble or vibration from the blower compartment, and higher-than-normal utility bills. The only way to know for certain is to remove the blower assembly and inspect it. We do this as part of our standard furnace inspection, photograph the wheel, and show you before quoting any cleaning. If the wheel is out of balance from debris buildup, cleaning it restores efficiency and reduces bearing wear.
Sometimes, but not always. If the coil face is accessible and the buildup is loose lint or dust, we can clean it in place with foaming cleaner and a low-pressure rinse, contained with a drain pan seal. If the buildup has bonded to the fins or the N-coil design blocks access to the second slab, we recommend pulling the coil for proper cleaning. We video-inspect first and give you a written price for either approach before proceeding.
Yes. Restricted airflow from a dirty blower wheel, clogged filter, or leaking return duct lowers the indoor coil temperature in heat mode, which extends defrost cycles and can lead to ice accumulation on the outdoor unit. We check static pressure, clean the blower and coil if needed, and seal return leaks. This restores proper airflow without adding refrigerant you may not need. Call (470) 326-1926 for a static pressure test and video inspection.
Whole-system Carrier air duct cleaning in Johns Creek typically ranges from $450 to $850 for a single system, depending on the number of duct runs, accessibility, and whether coil or blower cleaning is included. We also provide Carrier repair in Duluth with the same transparent pricing structure. Larger homes in Medlock Bridge or St. Ives with two or three Carrier systems run higher due to linear footage. We deliver one flat price per system in writing before work starts, with no per-vent add-ons. Call (470) 326-1926 for an exact quote - estimates are free.
Book Your Carrier Service in Johns Creek, GA
Call (470) 326-1926 to schedule your Carrier system inspection. A live person answers every call, 24/7. We will send a background-checked, uniformed technician who will show you the inside of your ducts before quoting a single dollar. Every job includes a written price, a Documented Photo Record, and our 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Johns Creek, serving Johns Creek since 2013.