Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Repair & Sealing Across Milton
Most duct repair and sealing jobs in Milton run $280-$750 per HVAC system depending on access, damage extent, and whether we’re sealing accessible joints or replacing collapsed flex runs. For the large custom homes common here, that means a typical property with three independent systems might see a total range of $840-$2,250 when all zones need attention. We quote each system separately, in writing, before any work starts.
We serve Milton from our Atlanta office, with crews running daily routes through the Crabapple, Bethany Bend, and Hopewell Road corridors. If you’re in a 4,000-plus square foot home with multiple zones that aren’t holding temperature evenly, the problem is usually leaky takeoffs and deteriorated joints at one or two air handlers while the remaining systems test tight. That’s why we test and price per system, not with a blanket whole-house figure. Call (470) 326-1926 and we’ll put a written estimate in your hands.
Why CleanRun Air Duct Cleaning Johns Creek Is Milton’s Preferred Duct Repair & Sealing Company
We’ve been working in Milton since 2013, and the pattern is consistent: homes here are bigger, systems are more numerous, and the ductwork is older than owners realize. Our Duct Repair & Sealing team has documented photo records from over 1,200 Milton properties, many of them horse-farm estates and custom builds off Birmingham Highway and Freemanville Road.
Our reviews from Milton customers consistently cite two things: the written price delivered before work starts, and the photo record showing what was actually found inside the ducts. Haven Standard Clause 1 requires it. No manager has to approve it. It’s simply how every job runs.
Response time to Milton is typically same-week scheduling, with dispatch coordinated from our Atlanta office. Technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews.
Tomas Reyes, who leads CleanRun, set the H.A.V.E.N. Standard specifically to counter the industry’s coupon-and-upsell model. In Milton, that means a technician who tests each zone independently, shows you the airflow readings, and explains why one system needs sealing while another doesn’t.
Our Duct Repair & Sealing Services in Milton
Duct Sealing with Mastic Sealant
Mastic sealant is a fiber-reinforced, water-based compound we brush onto leaking joints, takeoffs, and plenum connections. It cures to a hard, durable shell that outlasts tape by a decade or more. In Milton’s 1990s-2000s builds, we find mastic has often cracked or was never applied at the original construction, particularly at the air handler connections in basement mechanical rooms. A typical mastic sealing job on one system in Milton runs $280-$450. We photograph every sealed joint before the mastic cures and include those images in your documented photo record.
Flex Duct Repair
Flex duct, the insulated flexible tubing common in Milton’s era of construction, collapses, tears, or disconnects at the collar where it meets the main trunk. The long runs to bonus rooms and finished basements in these homes are especially vulnerable. Repair involves replacing damaged sections with new R-6 or R-8 flex, securing with mechanical fasteners, and sealing with mastic. In Milton, flex duct repair on one zone typically ranges from $320-$580 depending on linear footage and attic or crawl-space access. Our crews carry Nikro and Rotobrush equipment to maintain negative pressure during the repair so no debris enters the living space.
Metal Duct Repair
Hard metal ductwork, found in some of Milton’s higher-end custom builds and in commercial-style residential systems, develops seam separations, rust-through in humid crawl spaces, and loose dampers. We patch with galvanized steel, seal with high-temperature mastic, and reinforce at stress points. Metal repair runs higher than flex due to material and labor, typically $450-$750 per system in this market. We use Aprilaire and Honeywell components where replacement dampers or access panels are needed.
Duct Insulation and Air Leak Repair
Leaky ducts in unconditioned attics and crawl spaces pull in hot, humid outdoor air in summer and cold air in winter, destroying efficiency and driving humidity into the system. In Milton’s climate, where summer humidity regularly exceeds 80%, this is a major source of microbial growth inside ductwork. We seal all accessible leaks with mastic, then wrap exposed metal or damaged flex insulation with new fiberglass or closed-cell insulation. Air leak repair combined with insulation replacement on one system typically runs $380-$650. Every repair is pressure-tested and photographed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Milton
Our trucks stock parts from Rotobrush, Nikro, Honeywell, and Aprilaire, among others, so most Milton repairs don’t wait on a parts run. When we encounter a system with proprietary components, we source overnight rather than substituting with generic fittings. The equipment roster is published on every written estimate so you can verify what will be used before agreeing to the price.
Common Duct Repair & Sealing Problems We See in Milton Homes
- Leaky return connections pulling barn and garage air into the main house. Milton’s horse properties and estates with detached structures often share outdoor air through poorly sealed return plenums. Hay dust, equine dander, and red Georgia clay migrate into the primary residence’s ductwork, coating blower motors and filter racks.
- Failed flex joints in finished basements and bonus rooms. The late-1990s through mid-2000s construction boom in Milton produced thousands of homes with finished basements and over-garage bonus rooms. The long flex runs to these spaces commonly separate at collars or sag and collapse, dumping conditioned air into unconditioned cavities.
- Single-zone failure in multi-system homes masquerading as whole-house problems. Because Milton’s large homes run three or more independent HVAC systems, a failed takeoff on one air handler can make an entire floor uncomfortable while the other zones test perfectly tight. Homeowners get quoted whole-house sealing they don’t need.
- Humidity-driven mold in crawl-space duct runs. Milton’s humid subtropical climate and heavy Piedmont clay soils create persistently damp crawl spaces. Summer humidity infiltrates through every gap and joint, accelerating microbial growth inside flex ductwork that was never properly sealed at installation.
Pricing for Duct Repair & Sealing in Milton, GA
Here’s what duct repair and sealing actually costs in Milton’s market:
| Service | Typical Range (per system) |
|---|---|
| Mastic sealing of accessible joints | $280-$450 |
| Flex duct repair / replacement | $320-$580 |
| Metal duct repair | $450-$750 |
| Air leak repair with insulation | $380-$650 |
| Full system remediation (seal + repair + test) | $680-$1,100 |
Three factors move a job to the higher end: crawl-space access requiring protective setup, extensive linear footage in homes over 6,000 square feet, and contamination requiring HEPA-filtered negative air machines before sealing can begin. We see that last situation regularly on Milton’s horse properties, where hay chaff and fine organic particulate have accumulated in the ductwork.
Every estimate is free, written, and delivered before any work starts. Haven Standard Clause 1. Bring a competitor’s quote and we’ll provide a free second opinion in writing.
We Also Serve Cities Near Milton
Our crews run daily routes through Milton and neighboring Johns Creek, Duluth, Alpharetta, and Norcross. Dispatch is coordinated from our Atlanta office, with scheduling structured to minimize drive time and keep appointments reliable.
Serving Milton, GA - Our Local Coverage Area
We’re based in the Milton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Milton
We quote per system, tested independently. In Milton’s large custom homes, it’s common for one air handler to have failing takeoffs while the other two test tight. A whole-house price would have you paying for work you don’t need. We test each zone, show you the airflow readings, and write a separate price for any system that needs sealing or repair. Call (470) 326-1926 for an exact quote - estimates are free.
Yes, if the odor is entering through leaky return connections or plenum gaps. At a horse property off Hopewell Road, our tech found hay chaff and fine equine dander pulled through the return vents and packed against the blower motor of the main air handler; we set up HEPA filtration and negative pressure, ran camera inspection through the long supply and return ducts, then mastic-sealed the failing joints on the zone serving the bonus room. The homeowner told us the upstairs zone had never held temperature evenly until we sealed that run. Sealing won’t eliminate all barn odors, but it stops the duct system from acting as a vacuum for outdoor air. Call (470) 326-1926 for an exact quote - estimates are free.
Every joint we seal is photographed before and after mastic application, and we deliver pressure-test results showing static pressure and airflow improvement per system. Your documented photo record includes images of every sealed joint, plus the written scope and the 365-Day Done Right Promise. If the work is not right, we make it right - backed in writing, not subject to manager approval. Call (470) 326-1926 for an exact quote - estimates are free.
Usually yes. In Milton’s 1990s-2000s builds, the long flex runs to bonus rooms commonly separate at the collar, sag and restrict airflow, or were never properly sealed at the trunk connection. Conditioned air escapes into the garage cavity before reaching the room. We camera-inspect the run, identify the failure point, and repair or replace the damaged section with proper support and mastic sealing. Typical bonus room duct repair in Milton runs $320-$580. Call (470) 326-1926 for an exact quote - estimates are free.
For Milton’s pollen load - among the heaviest in the Atlanta metro due to dense hardwood and pine canopy - we typically recommend MERV 11 filters on systems with adequate blower capacity, or MERV 13 if the air handler is rated for the static pressure. Higher ratings trap more Georgia pine and oak pollen, but can strain older blowers. We check your system’s specifications before recommending. The filter is only effective if the ductwork is sealed, though. A MERV 13 filter in a leaky system still pulls unfiltered air through gaps. Call (470) 326-1926 for an exact quote - estimates are free.
Ready to get a written price before any work starts? Call CleanRun at (470) 326-1926. We’ll schedule a free estimate, test each of your systems independently, and show you exactly what we find.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Johns Creek, serving Milton since 2013.